A transformer would be best described as electrical equipment that would transfer power from one voltage system to the other using electromagnetic induction. All transformers have been known to entail metallic coil carrying electric current along with an iron core used for creating a magnetic field.
Use of a transformer
The major reason for using a transformer would be to meet the voltage of the load to that of the line voltage as supplied by the utility. It would be pertinent to mention here that the air-cooled, dry-type transformers would not be inclusive of volatile or inflammable materials. It would be based on the natural flow of air over the coils along with the heat radiation through its enclosure for the purpose of cooling. Therefore, it might be located at the load without the need of any special vault.
Choosing the right transformer suitable for your application
Transformers have been made available in a wide variety of voltages. The capacity of the transformer would dictate the power required for a specific device that could be handled prior to overloading it.
It would be pertinent to mention here that the application tends to play a significant role in choosing the right power transformer rental. There have been instances where the typical load might spike and should be considered when choosing a specific transformer.
How to choose the right transformer suitable for your needs
Let us delve on the essential steps of choosing a transformer suitable for your specific needs.
- Determining the Amperes, KVA, and wattage requisite for the load
Determining the amperes, KVA or wattage would be required for the load. The size of the transformer would be determined by the KVA. However, you would need to add the entire number of pieces of equipment involved.
- Determining the supply voltage
It would be essential to determine the available voltage in order to link to the primary of the transformer. The primary voltage or the line voltage would be the available voltage from your local or utility power source.
- Determining the voltage of the load
It would be the secondary voltage of the transformer. It would be the necessary voltage for operating the load.
- Determining the frequency of the supply source
It would be essential that you take care of the frequency of the supply source along with the load to be the same.
You would be required to choose the right model in order to meet your specific needs.
